Furuno GS-100 Operator's Manual page 71

Tabletop mounting
Flush mounting type S
The optional flush mount kit type S is required. (Name: Flush Mount Kit (S-type), Type:
OP20-40, Code No.: 001-243-890)
Name
Spring Washer
Hexagonal Head Slot Bolt
Wing Nut
Wing Bolt
F(lush) Mounting Fixture
1. Prepare a cutout in the mounting location whose dimen-
sions are 242 (W) × 152 (H) mm.
2. Insert the unit to the cutout.
3. Attach two flush mounting fixtures to the unit with two
hexagonal head slot bolts (M6×12) and two spring
washers.
4. Screw four wing bolts to four wing nuts.
5. Fasten the unit with four wing bolts assembled at step 4,
and then tighten four wing nuts.
Flush mounting type F
The optional flush mount kit type F is required. (Name: Flush Mount Kit (F-type), Type:
OP20-41, Code No.:001-243-900)
Name
Spring Washer
Self-tapping Screw
Hexagonal Head Slot Bolt
Panel
Type
M6 SUS304
M6×12 SUS304
M4 YBSC2
M4×30 YBSC2
20-035-1062
Type
M6 SUS304
5×20 SUS304
M6×12 SUS304
20-035-1061
8. INSTALLATION
Code No.
000-158-855-10
000-162-897-10
000-168-239-10
000-168-243-10
100-381-290-10
Code No
000-158-855-10
000-162-608-10
000-162-897-10
100-380-480-10
Qty
2
2
4
4
2
Qty
2
4
2
1
8-3