Furuno GS-100 Operator's Manual page 98

APPENDIX 1 MENU TREE
DS-600 (The menus available on the sub display)
MENU ESC key
├ Ship's Time
│ ├
Source (Internal (-13:00 - + 13:00), NAV EQUIP )
│ └
Summer Time (ON, OFF )
├
Ship's Track (Past+Predict , Past, Predict, OFF)
├ ├ Plot Time (1min, 2min, 5min , 10min, 20min, 30min) Plot Time (1min 2min 5min 10min 20min 30min)
├ Past Tracks (ON , OFF)
├
Vector Time (30s, 1min, 2min, 5min , 10min, 20min)
├ Display (DISP1, DISP2)
├ Scale Set Up
│ ├ Speed Graphic (DISP1, DISP2)
│ │
│ │
│ │ │ │
│ │
│ │
│ │
│ │
│ ├ Depth REF (EXT DBK , EXT DBT, INT DBT)
│ ├
Direction SYM (Arrows , Text)
│ ├
SYM Location (Left , Right)
│ │ ├ ├
Berthing Range (50m(0.025NM) , 75m(0.040NM) , 100m(0.050NM) , 150m(0.075NM ), B thi
│ │ 200m(0.100NM) , 250m(0.125NM), 300m(0.150NM), 400m(0.200NM), 600m(0.300NM),
│ │ 800m(0.400NM), 1000m(0.500NM), Save)
│ ├
Berthing Data Display (3 axis in NAV , 3 axis and NAV, 3 axis)
│ ├
CUR Direction (Flow to , Flow from)
│ └ Mode
│ ├
│ └
│ │ Initialize
├
Speed Limit Alarm (SET, 0.00 - 40.00; 40.0kn , OFF )
├
Wind Average (No Averaging, 1min , 2min, 3min, 5min, 10min)
├
Key Beep (ON , OFF)
├
Key BRILL (1, 2 , 3, 4, 5, 6, 7, 8)
├
Speed Select (Forward-After , Vector)
├ TESTS (System TEST, Display Unit TEST, LCD TEST)
└ └
User RESET (Yes, No ) User RESET (Yes, No )
AP-4 AP-4
├
Astern SPD Scale (5kn(2.5m/s, 10km/h) , 10kn(5.0m/s, 20km/h),
│ 15kn(7.5m/s, 30km/h), 20kn(10.0m/s, 40km/h),
│ │ 25kn(12 5m/s 50km/h) 30kn(15 0m/s 60km/h) 25kn(12.5m/s, 50km/h), 30kn(15.0m/s, 60km/h),
│ 35kn(17.5m/s, 70km/h), 40kn(20.0m/s, 80km/h),
│ 45kn(22.5m/s, 90km/h))
└ Ahead SPD Scale (Same choices as above,
25kn(12.5m/s, 50km/h) )
R (50 (0 025NM) 75 (0 040NM) 100 (0 050NM) 150 (0 075NM )
Wind (True , Theoretical, Relative, OFF)
Time (UTC , Ship's Time)