Furuno GS-100 Operator's Manual page 91

5. Press the PWR key to turn the power off.
Menu item
[Operation]
[SIO Monitor]
[L/L digit]
Others
How to set the displays
The DS-600 is preset with five displays as below:
• DISP1: Navigation data
• DISP2: Berthing (Head-up)
• DISP3: Heading and speed
• DISP4: Trip distance and total distance
• DISP5: Speed analog data (sub display only)
Only two berthing displays (for head-up and north-up) are available on the display unit
DS-600 connected to the GS-1002. Set the displays as follows:
1. Press the MENU ESC key to open the menu.
2. Select [Display] then press the ENT key.
Meaning
Select [Main] or [Sub].
(For the display unit con-
nected to the GS-1002, se-
lect [Sub].)
Monitor the serial signal input to the display units (main
and sub).
Set the number of digits to
show for the minutes indi-
cation in latitude and longi-
tude position.
For the serviceman. No use in installation.
8. INSTALLATION
Option (bold: default)
[Main], [Sub]
[3digit], [4digit]
8-23