How To Set The Sentences To Output To The Ethernet - Furuno GS-100 Operator's Manual

3. SETTINGS
8. Select [3 Sentence].
9. Press the cursorpad to select the sentence then press the ENT key.
10. Press the cursorpad (
Sentence
VBW, VLW, VTG, ZDA
HDT, HRM, ROT, THS,
GPatt, GPhve
11. Press the ENT key.
12. Set [2 Output Data2], [3 Output Data3] and [4 Output Data4] similarly.
13. Press the MENU ESC key to close the sentence window.
3.9.2

How to set the sentences to output to the Ethernet

1. Press the MENU ESC key to open the main menu.
2. Select [5 I/O] then [5 Ethernet].
3. Select [1 Sentence].
4. Press the cursorpad to select the sen-
tence then press the ENT key.
5. Press the cursorpad (
the TX interval.
Sentence
VBW, VLW, VTG, ZDA
HDT, HRM, ROT, THS,
GPatt, GPhve
6. Press the ENT key.
7. Press the MENU ESC key to close the sentence window.
3-12
or ) to select the TX interval.
Available TX interval
[- - -] (off), [1s], [2s], [3s], [4s], [5s], [10s]
[- - -] (off), [0.020s]*, [0.025s]*, [0.1s]*, [0.2s], [1s], [2s], [4s]
*: Available when selecting [38400 bps] at step 7.
or ) to select
Available TX interval
[- - -] (off), [1s], [2s], [3s], [4s], [5s], [10s]
[- - -] (off), [0.020s], [0.025s], [0.1s], [0.2s], [1s], [2s], [4s]