Furuno GS-100 Operator's Manual page 97

6 Sensor Setting
├ Correction
│ ├ HDG Offset*
│ ├ Pitch Offset (Open the setting window.)
│ ├ Roll Offset (Open the setting window.)
│ ├ Position Offset* (Open the setting window.)
│ ├ ShipSize·ANT/CALC-SPD POS* (Open the setting window.)
│ │ └ SOG Correction* (Open the setting window.) SOG Correction (Open the setting window.)
GNSS
├
│ ├
Method (GPS )
Condition
│ ├
│ │ ├
│ │ └
│ └ Source**
Beacon/SBAS
├
│ ├
Mode (GNSS, GNSS+SBAS )
│ │ ├ ├
SBAS Search (Auto , Manual)
│ └ Not used Satellite
│ └
Other
├
│ ├
App Reset (Yes, No )
│ ├
Clear Setting (Yes, No )
│ ├
Dead Reckoning Time (1 min , 2 min, 3 min, 4 min, 5 min)
│ └
HDG Output Restart Mode (Manual, Auto )
└ └ Device List (Open the device list.)
7 System Setting
├ System
│ ├
Unit of Distance (NM , km, SM)
│ ├ Unit of Depth (m, ft , fm)
│ ├
Datum (WGS84 , WGS72, PZ90, CK42, CK95, Other)
│ ├
Local Time (UTC , Local (Open the setting window.))
│ │ ├ ├
Summer Time (On, Off ) Summer Time (On, Off )
│ ├
Master Sensor* (Auto , Manual)
│ └ Password*** (Open the setting window.)
├ Network
│ ├ Ethernet* (Open the setting window.)
│ ├ Equipment ID (Open the setting window.)
│ ├
SNTP Server (On , Off)
│ ├
Maintenance Port (Enable, Disable )
│ │ └ RMS IP ADR/Port* (Open the entry window.)
├ Tech Menu
│ ├
Inner Status* (No , Yes)
│ ├ Legacy Sentence Input* (Disable , Enable)
│ ├
VTG Speed Source* (Sensor Raw , Corrected)
│ ├ VBW Speed Source* (Sensor Raw, Corrected )
│ ├ Trip calc* (DS Mode , GS Mode)
│ └
Device Mode* (SDME , THD)
Demo
├ ├
│ ├ Moving Setting (Open the setting window.)
│ ├ Attitude Setting (Open the setting window.)
│ ├ Output Status (Simulation , Fix, Differential Fix, Estimation(DR), Manual Input, No Fix)
Demo Start
│ └
├ Berthing Line
│ ├ List (Open the berthing line list.)
│ └ Share (Send the berthing line data to DS-600.)
├ ├
Language/ g g
└ Clear Memory
├
Clear Display Setting (Yes, No )
├
Clear GPS (Yes, No )
├
Clear All (Yes, No )
└ Factory Default* (Yes, No )
Elevation Mask** (Open the setting window.) **: Reserved for
Not used GPS (Open the setting window.)
SBAS (Open the setting window.)
( p
( (English , g , ) )
*: For serviceman.
***: For user.
y )
APPENDIX 1 MENU TREE
future use.
AP-3 AP-3