How To Select The Input Data - Furuno GS-100 Operator's Manual

3.9.3

How to select the input data

1. Press the MENU ESC key to open the main menu.
2. Select [5 I/O] then [6 Data
Source Select].
3. Select [1 HDG].
4. Select the port for heading data. For [5 Ethernet], go
to step 5. For [6 CAN], go to step 11. For [1 Data1]
(or 2, 4), go to step 7.
5. Enter the Ethernet SFI with two alphabets and four figures. SFI (System Function
ID) is an identification code used by the system.
To enter "AB1234", for example, do as follows:
1) Use the cursorpad to select "A" then press the ENT key.
2) Use the cursorpad to select "B" then press the ENT key. The cursor moves to
"0".
3) Use the cursorpad ( ) to select "1" then press the ENT key. Or press the 1
key.
4) Refer to step 3, enter "2", "3" and "4".
6. Move the cursor to [Enter] then press the ENT key. Go to step 11.
7. Select [1 HDG].
Backspace
3. SETTINGS
3-13