8. INSTALLATION
8.4
Adjustments
8.4.1
Language
The available languages are English and Japanese.
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [6 Language/
3. Select [1 English].
4. Press the MENU ESC key to close the main menu.
8.4.2
Device mode
There are two display modes, [SDME] and [THD]. Only a serviceman can switch these
modes, at the installation.
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [3 Tech Menu].
3. Select [6 Device
Mode].
4. Select [SDME] or
[THD].
[SDME]: Enables the
SDME mode.
[THD]: Enables the
THD mode.
5. Press the MENU
ESC key to close the
main menu.
8.4.3
Unit
You can set the units of measurement for distance and depth.
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Set-
ting] then [1 System].
8-14
*1
*2
*1
*1
*2
*1: No use.
*2: For serviceman.
].