Menu Settings For Ds-600 - Furuno GS-100 Operator's Manual

8. INSTALLATION
How to set the cosmetic caps and alarm lid assembly
Set a cosmetic cap to each fixing hole on the front panel as shown in the illustration
below.
For the display unit to be used as a sub display, attach the alarm lid (supplied as ac-
cessories) to the ALARM ACK key to prevent accidental operation of the key.
Alarm lid assembly
(For sub display only)
Attach the double-sided tape
to the reverse side of the lid,
and attach the lid here.
8.6.2

Menu settings for DS-600

Set up for use with the DS-600 from the Service menu.
How to use the Service menu
1. Press the PWR key while pressing the DISP key to show the Service menu.
2. Use
window.
3. Use
press the MENU ESC key.
4. Repeat steps 2 and 3 to complete the setting. For items to be set at the installa-
tion, see the table at the top of the next page.
8-22
or to select a menu item then press the ENT key to show the setting
or to change the setting then press the ENT key. To return to the menu,
Set cosmetic cap to hole so cap is flush with panel.