Integrity Display; Axis Speed Display - Furuno GS-100 Operator's Manual

3-axis speed display

The circle at the center of the display shows the own ship's speed.
Heading velocity
N
Picture
of ship
N, E, S, W:
Bearing scale
*: These triangles are displayed in the following conditions:
• Current direction: Selected [Current True] in the [Window2] menu.
• Wind velocity:
• Drift angle:
**: When the current indication method is [Flow from] (set on the [Current] menu, see
paragraph 3.1.2), the blue icon for current direction turns 180° and is displayed outside
of the circle.
***: The speed value at the position where the antenna is installed is more accurate.
2.4

Integrity Display

The integrity display, available in the THD mode, provides information about GPS sat-
ellite position and signal quality. There are three integrity displays: GNSS, graph for
satellite angle and graph for signal noise ratio.
Use the cursorpad (
/
Current direction* ** (Blue)
Bow velocity
Bow
Broadside speed
at stern position***
Stern
Selected [Wind] in the [Window3] menu.
Selected [Drift] in the [Window5] menu.
or ) to change the displays, in the following sequence.
GNSS
Graph: signal
noise ratio
Wind velocity* (Magenta)
Graph:
satellite angle
2. DISPLAYS
Drift angle*
(Brown
Broadside speed at
bow position***
Speed for
heading
Stern velocity
: Press the ▼ key.
: Press the ▲ key.
2-5