Table of Contents
Advertisement
1.2
Display Unit
1.2.1
Mounting considerations
The display unit can be installed on a tabletop, on the overhead, on the bulkhead or flush
mounted in a console or panel.
When selecting a mounting location for the display unit keep the following in mind.
•
Keep the display unit out of direct sunlight.
•
The temperature and humidity of the mounting location should be moderate and stable.
•
Locate the unit away from exhaust pipes and vents.
•
Keep the unit away from electromagnetic field-generating equipment such as motors and
generators.
•
For maintenance and checking purposes, leave sufficient space at the sides and rear of the
unit and leave slack in cables.
•
A magnetic compass will be affected if the display unit is too close to it. Observe the
compass safe distances to prevent disturbance to the magnetic compass.
1.2.3
Mounting procedure (tabletop, overhead)
1. Fix the hanger with four tapping screws (M5x20).
2. Screw knob bolts in display unit, set it to hanger, and tighten knob bolts.
1.2.4
Flush mounting
There are two types of flush mount kits, F type and S type. For details, see the outline diagrams
at the back of this manual.
Tabletop
Display unit, tabletop and overhead mounting method
Overhead
2
Hide quick links:
Advertisement
Table of Contents
