Chapter3. ICA-310 – 30M Infrared Internet Camera
3.1 Package Content
ICA-310 x 1
Power Adapter x 1
Wall Mount Accessories x 1
CD Disk x 1
Quick Installation Guide x 1
Software CD x 1
3.2 Physical Installation
1. Connect an Ethernet cable
Connect the LAN cable on the ICA-310 to the network device (hub or switch).
2. Connect the power source
Please connect the provided power adapter to ICA-310 power connector and connect the
power plug to power outlet. If there is a PoE switch in your network, you can connect the
ICA-310 LAN cable to this PoE switch to obtain power. The power adapter is unnecessary
when ICA-310 is connected to a PoE switch.
3. Identification of ICA-310 cables
RS485 cables (Blue: D+ / Red: D- ) - To con-
nect to P/T scanner.
Power Connector – Connect to DC 12V
power adapter.
BNC connector – For analog video output.
RJ-45 Connector – For connect a CAT5 cable
to hub or switch.