Reset Configuration Data; Resources Controlled By - DFI LANParty UT ICFX3200-T2R/G User Manual

3
BIOS Setup
PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
x IRQ Resources
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.

Reset Configuration Data

Enabled
Disabled

Resources Controlled By

The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto(ESCD) The system will automatically detect the settings for
Manual
108
Phoenix - AwardBIOS CMOS Setup Utility
Reset Configuration Data
Resources Controlled By
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
PCI Latency Timer(Per 8CLK)
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
Maximum Payload Size
: Move Enter: Select
The BIOS will automatically reset the Extended System
Configuration Data (ESCD) once. It will then recreate a
new set of configuration data.
The BIOS will not reset the configuration data.
you.
Choose the specific IRQ in the "IRQ Resources"
field.
PnP/PCI Configurations
Disabled
Auto(ESCD)
Press Enter
Disabled
Enabled
Enabled
8
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
4096
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults