Reset Configuration Data; Resources Controlled By - DFI CS15-BN User Manual

3.1.6 PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.

Reset Configuration Data

Resources Controlled By

X IRQ Resources
PCI/VGA Palette Snoop
PCI Slot 1 Use IRQ
PCI Slot 2 Use IRQ
PCI Slot 3 Use IRQ
↑↓→← Move
The settings on the screen are for reference only. Your version may not be
identical to this one.
Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
Disabled The BIOS will not reset the configuration data.
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto The system will automatically detect the settings for you.
Manual Choose the specific IRQ in the "IRQ Resources" field.
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
PnP/PCI Configurations
Disabled
Auto(ESCD)
Press Enter
Disabled
Auto
Auto
Auto
Enter:Select +/-/PU/PD:Value
F5:Previous Values
F6:Fail-Safe Defaults
Award BIOS Setup Utility
Item Help
Menu Level
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot.
F10:Save ESC:Exit F1:General Help
F7:Optimized Defaults
3
55