2
Hardware Installation
Serial ATA Connectors
Four Serial ATA ports supported by the ATI SB600 chip
(LP UT ICFX3200-T2R/G and LP UT ICFX3200-T2/G)
•
SATA speed up to 3Gb/s
•
RAID 0, RAID 1 and RAID 0+1
Connecting Serial ATA Cables
Connect one end of the Serial ATA cable to the Serial ATA connec-
tor and the other end to your Serial ATA device.
BIOS Setting
Configure Serial ATA in the Integrated Peripherals submenu ("South
OnChip PCI Device" section) of the BIOS. Refer to chapter 3 for
more information.
Configuring RAID
The system board allows configuring RAID on Serial ATA drives.
Refer to chapter 5 for steps in configuring RAID.
60
SATA 1-2
SATA 3-4