DFI LANParty UT ICFX3200-T2R/G User Manual page 55

USB (Universal Serial Bus) Ports
USB 2
USB 1
USB 4
USB 3
USB 6
USB 5
The system board supports 10 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
Six onboard USB 2.0/1.1 ports (Black) are at locations CN3 (USB
1-2), CN4 (USB 3-4) and CN6 (USB 5-6) of the system board.
The J18 (USB 7-8) and J33 (USB 9-10) connectors allow you to
connect 4 additional USB 2.0/1.1 ports. The USB ports may come
mounted on a card-edge bracket. Install the card-edge bracket to an
available slot at the rear of the system chassis then insert the con-
nector that is attached to the USB port cables to J18 or J33.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu of
the BIOS. Refer to chapter 3 for more information.
Hardware Installation
2
USB 7-8
1
USB 9-10
2
1 0
9
55