DFI G7L330-B User Manual
  1. Manuals
  2. Brands
  3. DFI Manuals
  4. Motherboard
  5. G7L330-B
  6. User manual

DFI G7L330-B User Manual

System board
Hide thumbs
Table of Contents

Advertisement

Quick Links

G7L330-B

System Board

User's Manual
935-G7L332-000G
A89020622

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G7L330-B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for DFI G7L330-B

Summary of Contents for DFI G7L330-B

  • Page 1: System Board

    G7L330-B System Board User’s Manual 935-G7L332-000G A89020622...
  • Page 2 Copyright This publication contains information that is protected by copyright. No part of it may be reproduced in any form or by any means or used to make any transformation/adaptation without the prior written permission from the copyright holders. This publication is provided for informational purposes only. The manufacturer makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any...

  • Page 3: Fcc And Doc Statement On Class B

    FCC and DOC Statement on Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.

  • Page 4: Table Of Contents

    Table of Contents About this Manual................Warranty..................... Static Electricity Precaution..............Safety Measures..................About the Package................Before Using the System Board............Chapter 1 - Introduction..............Specifications........................... Special Features of the System Board..............Chapter 2 - Hardware Installation............ System Board Layout ......................System Memory..........................

  • Page 5: About This Manual

    About this Manual An electronic file of this manual is included in the CD. To view the user’s manual in the CD, insert the CD into a CD-ROM drive. The autorun screen (Main Board Utility CD) will appear. Click “User’s Manual”...

  • Page 6: Static Electricity Precaution

    Introduction Static Electricity Precautions It is quite easy to inadvertently damage your PC, system board, components or devices even before installing them in your system unit. Static electrical discharge can damage computer components without causing any signs of physical damage. You must take extra care in handling them to ensure against electrostatic build-up.

  • Page 7: About The Package

    Introduction About the Package The system board package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. One system board One IDE cable One FDD cable One bracket mounted with 2 USB ports One Serial ATA data cable One Serial ATA power cable One I/O shield...

  • Page 8: Chapter 1 - Introduction

    Introduction Chapter 1 - Introduction Specifications Processor • LGA 775 socket for: ® ® Intel Pentium ® ® ® Intel Pentium 4 or Intel Celeron ® Intel Celeron D • Supports Intel Enhanced Memory 64 Technology (EMT64T) • Supports Enhanced Intel SpeedStep Technology (EIST) •...
  • Page 9 Introduction Wake-On-LAN RTC timer to power-on the system • AC power failure recovery Hardware Monitor • Monitors CPU/system temperature and overheat alarm • Monitors Vcore/V3SB/Vcc3/Vcc5/12V/V5SB/VBAT voltages • Monitors the speed of the CPU/system fan • CPU Overheat Protection function monitors CPU temperature and fan during system boot-up - automatic shutdown upon system overheat •...
  • Page 10 Introduction Rear Panel I/O Ports • 1 mini-DIN-6 PS/2 mouse port • 1 mini-DIN-6 PS/2 keyboard port • 1 DB-9 serial port • 1 DB-25 parallel port • 1 DB-15 VGA port • 1 IEEE 1394 port • 1 RJ45 LAN port •...

  • Page 11: Special Features Of The System Board

    Introduction Special Features of the System Board Watchdog Timer The Watchdog Timer function allows your application to regularly “clear” the system at the set time interval. If the system hangs or fails to function, it will reset at the set time interval so that your system will continue to operate PCI Express PCI Express is a high bandwidth I/O infrastructure that possesses...
  • Page 12 Introduction Please refer to Appendix A for information a bout enabling the func- tionality of the Hyper-Threading Technology. For more information on Hyper-Threading Technology, go to: www.intel.com/info/hyperthreading. CPU Overheat Protection CPU Overheat Protection has the capability of monitoring the CPU’s temperature during system boot up.
  • Page 13 Introduction Serial ATA Interface Serial ATA is a storage interface that is compliant with SATA 1.0 specification. With speed of up to 3Gb/s, it improves hard drive performance faster than the standard parallel ATA whose data transfer rate is 100MB/s. IEEE 1394 Interface IEEE 1394 is fully compliant with the 1394 OHCI (Open Host Controller Interface) 1.1 specification.
  • Page 14 Introduction Wake-On-Ring This feature allows the system that is in the Suspend mode or Soft Power Off mode to wake-up/power-on to respond to calls coming from an external modem or respond to calls from a modem PCI card that uses the PCI PME (Power Management Event) signal to remotely wake up the PC.
  • Page 15 Introduction RTC Timer to Power-on the System The RTC installed on the system board allows your system to auto- matically power-on on the set date and time. ACPI STR The system board is designed to meet the ACPI (Advanced Con- figuration and Power Interface) specification.

  • Page 16: Chapter 2 - Hardware Installation

    Hardware Installation Chapter 2 - Hardware Installation System Board Layout...

  • Page 17: System Memory

    Hardware Installation Warning: Electrostatic discharge (ESD) can damage your system board, processor, disk drives, add-in boards, and other components. Perform the upgrade instruction procedures described at an ESD workstation only. If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the system chassis.

  • Page 18: Hardware Installation

    Hardware Installation Virtual Single Channel (VSC) If both channels are populated with different memory configurations, the MCH defaults to Virtual Single Channel. Dual Channel (DC) Dual channel provides better system performance because it doubles the data transfer rate. Dynamic Mode Addressing This mode minimizes the overhead of opening/closing pages in memory banks allowing for row switching to be done less often.
  • Page 19 Hardware Installation The table below lists the various optimal operating modes that should be configured for the memory channel operation. Config DDR2_1 DDR2_2 DDR2_3 DDR2_4 No memory Single channel A Single channel A Single channel A Single channel B Single channel B Single channel B P(**) Virtual single channel...
  • Page 20 Hardware Installation DDR2_1 DDR2_2 DDR2_3 DDR2_4 Config P(*)(2,4) Dynamic Mode Addressing P(*)(2,4) P(*)(1,3) Dynamic Mode Addressing P(*)(1,3) P(*)(1,3) P(*)(2,4) P(*)(1,3) P(*)(2,4) Dynamic Mode Addressing P(*)(2,4) P(*)(2,4) Dynamic Mode Addressing P(*)(1,3) P(*)(1,3) Dynamic Mode Addressing P(*)(1,3) P(*)(2,4) P(*)(1,3) P(*)(2,4) Dynamic Mode Addressing P - denotes populated E - denotes empty * - denotes DIMMs are identical...
  • Page 21 Hardware Installation Installing the DIMM A DIMM simply snaps into a DIMM socket on the system board. Pin 1 of the DIMM must correspond with Pin 1 of the socket. Notch Pin 1 1. Pull the “tabs” which are at the ends of the socket to the side. 2.

  • Page 22: Cpu

    Hardware Installation Overview The system board is equipped with a surface mount LGA 775 socket. This socket is exclusively designed for installing a LGA 775 packaged Prescott CPU. Important: 1. Before you proceed, make sure (1) the LGA775 1. Before you proceed, make sure (1) the LGA775 1.
  • Page 23 Hardware Installation Important: The CPU socket must not come in contact with anything other than the CPU. Avoid unnecessary exposure. Remove the protective cap only when you are about to install the CPU. 4. The CPU socket comes with a cover that is attached with a removable protective cap.
  • Page 24 Hardware Installation 7. Now lift the cover. Cover 8. Position the CPU above the socket. The gold mark on the CPU must align with pin 1 of the CPU socket. Important: Handle the CPU by its edges and avoid touching the pins. Gold mark Pin 1 of the socket...
  • Page 25 Hardware Installation 9. Insert the CPU into the socket until it is seated in place. The CPU will fit in only one orientation and can easily be inserted without exerting any force. Important: Do not force the CPU into the socket. Forcing the CPU into the socket may bend the pins and damage the CPU.
  • Page 26 Hardware Installation 11. Push the lever down to lock the socket. The lever should hook onto the side tab to indicate that the CPU is completely secured in the socket. Installing the Fan and Heat Sink The CPU must be kept cool by using a CPU fan with heat sink. Without sufficient air circulation across the CPU and heat sink, the CPU will overheat damaging both the CPU and system board.
  • Page 27 Hardware Installation 2. Place the heat sink on top of the CPU. The 4 studs around the heat sink which are used to secure the heat sink onto the system board must match the 4 mounting holes around the socket. Position each stud so that the groove faces the heat sink then push it down firmly until it clicks into place.

  • Page 28: Jumper Settings

    Hardware Installation Jumper Settings Clear CMOS Data 1-2 On: Normal (default) 2-3 On: Clear CMOS Data If you encounter the following, a) CMOS data becomes corrupted. b) You forgot the supervisor or user password. c) You are unable to boot-up the computer system because the processor’s clock was incorrectly set in the BIOS.
  • Page 29 Hardware Installation 4. After powering-on the system, press <Del> to enter the main menu of the BIOS. 5. Select the Frequency/Voltage Control submenu and press <Enter>. 6. Set the processor’s clock to its default setting or an appropriate bus clock. Refer to the Frequency/Voltage Control section in chapter 3 for more information.
  • Page 30 Hardware Installation PS/2 Power Select 1-2 On: 5V 2-3 On: 5VSB (default) JP3 is used to select the power of the PS/2 keyboard/mouse port. Selecting 5VSB will allow you to use the PS/2 keyboard or PS/2 mouse to wake up the system. BIOS Setting Configure the PS/2 keyboard/mouse wake up function in the Integrated Peripherals submenu (“Super IO Device”...

  • Page 31: Usb Power Select

    Hardware Installation USB Power Select USB 1-4 (JP2) 2-3 On: 5VSB 1-2 On: 5V (default) USB 5-8 1-2 On: 5V 2-3 On: 5VSB (JP1) (default) JP1 and JP2 are used to select the power of the USB por ts. Selecting 5VSB will allow you to use the USB keyboard or USB mouse to wake up the system.

  • Page 32: Rear Panel I/O Ports

    Hardware Installation Rear Panel I/O Ports PS/2 Mouse Parallel 1394_1 Line-in Line-out Mic-in PS/2 K/B USB 1-2 USB 3-4 The rear panel I/O ports consist of the following: • PS/2 mouse port • PS/2 keyboard port • Parallel port • COM port •...
  • Page 33 Hardware Installation PS/2 Mouse and PS/2 Keyboard Ports PS/2 Mouse PS/2 Keyboard The system board is equipped with an onboard PS/2 mouse (Green) and PS/2 keyboard (Purple) ports - both at location CN7 of the system board. The PS/2 mouse port uses IRQ12. If a mouse is not connected to this port, the system will reserve IRQ12 for other expansion cards.

  • Page 34: Serial Port

    Hardware Installation Serial Port COM 1 COM 2 The system board is equipped with an onboard serial port at loca- tion CN5 for COM 1. It is also equipped with a 9-pin connector at location J7 for COM 2. These serial ports are RS-232 asynchronous communication ports with 16C550A-compatible UARTs that can be used with modems, serial printers, remote display terminals, and other serial devices.

  • Page 35: Parallel Port

    Hardware Installation Parallel Port Parallel The system board has a standard parallel port (Burgundy) at loca- tion CN4 for interfacing your PC to a parallel printer. It supports SPP, ECP and EPP. Setting Function Allows normal speed operation but (Standard Parallel Port) in one direction only.

  • Page 36: Vga Port

    Hardware Installation VGA Port The system board can only be used with an analog video monitor. Connect the monitor’s 15-pin D-shell cable connector to the VGA port (Blue) at location CN6. If your monitor supports analog video but does not have a 15-pin D-shell connector, see your monitor dealer for the adapter or optional cable.
  • Page 37 Hardware Installation IEEE 1394 1394_1 1394_2 The system board is equipped with an onboard IEEE 1394 port at location CN1 (IEEE 1394_1) of the system board. It is also equipped with an IEEE 1394 connector at location J1 (1394_2) for connecting an additional 1394 port. The 1394 port may be mounted on a card-edge bracket.
  • Page 38 Hardware Installation USB Ports USB 2 USB 1 USB 4 USB 3 USB 5-6 USB 7-8 The system board supports 8 USB 2.0/1.1 ports. USB allows data exchange between your computer and a wide range of simultaneously accessible external Plug and Play peripherals. Four onboard USB 2.0/1.1 ports (Black) are at locations CN1 (USB 1-2) and CN2 (USB 3-4) of the system board.
  • Page 39 Hardware Installation Driver Installation You may need to install the proper drivers in your operating system to use the USB device. Refer to your operating system’s manual or documentation for more information. Refer to chapter 4 for more information about installing the USB 2.0 driver.

  • Page 40: Rj45 Lan Port

    Hardware Installation RJ45 LAN Port The RJ45 LAN port is at location CN2 of the system board. LAN allows the system board to connect to a local area network by means of a network hub. BIOS Setting Configure the onboard LAN in the in the Integrated Peripherals submenu (“Onboard Device”...
  • Page 41 Hardware Installation Audio (Rear Audio and Front Audio) Line-in Line-out Rear Audio Mic-in Front audio Rear Panel Audio • Line-in (Light Blue) In a 2-channel or 4-channel mode, this jack is used to connect any audio devices such as Hi-fi set, CD player, tape player, AM/ FM radio tuner, synthesizer, etc.
  • Page 42 Hardware Installation 4-channel 2-channel 6-channel Line-in Light Blue Line-in Center/Subwoofer Front R/L Lime Line-out Front R/L Rear R/L Pink Mic-in Rear R/L Front Audio The front audio connector (J4) allows you to connect to the line-out and mic-in jacks that are at the front panel of your system. Using this connector will disable the rear audio’s line-out and mic-in func- tions.

  • Page 43: I/O Connectors

    Hardware Installation I/O Connectors CD-in Internal Audio Connector Ground Ground Right audio Left audio channel channel The CD-in (J6) connector is used to receive audio from a CD-ROM drive, TV tuner or MPEG card.
  • Page 44 Hardware Installation S/PDIF SPDIF out SPDIF in The system board is equipped with a S/PDIF connector. One card- edge bracket, mounted with S/PDIF ports, may be provided with the system board. Install the card-edge bracket to the system chassis then connect the audio cable connector to J5. Make sure pin 1 of the audio cable connector is aligned with pin 1 of J5.

  • Page 45: Floppy Disk Drive Connector

    Hardware Installation Floppy Disk Drive Connector The system board is equipped with a shrouded floppy disk drive connector that supports two standard floppy disk drives. To prevent improper floppy cable installation, the shrouded floppy disk header has a keying mechanism. The 34-pin connector on the floppy cable can be placed into the header only if pin 1 of the connector is aligned with pin 1 of the header.

  • Page 46: Serial Ata Connectors

    Hardware Installation Serial ATA Connectors SATA 4 SATA 3 SATA 2 SATA 1 The system board is equipped with four Serial ATA connectors for connecting Serial ATA devices. Connect one end of the Serial ATA cable to J15 (SATA 1), J16 (SATA 2), J17 (SATA 3) or J18 (SATA 4) and the other end to your Serial ATA device.

  • Page 47: Ide Disk Drive Connector

    Hardware Installation IDE Disk Drive Connector The system board is equipped with a shrouded PCI IDE header that will interface two Enhanced IDE (Integrated Drive Electronics) disk drives. To prevent improper IDE cable installation, the shrouded PCI IDE header has a keying mechanism. The 40-pin connector on the IDE cable can be placed into the header only if pin 1 of the connector is aligned with pin 1 of the header.
  • Page 48 Hardware Installation Adding a Second IDE Disk Drive When using two IDE drives, one must be set as the master and the other as the slave. Follow the instructions provided by the drive manufacturer for setting the jumpers and/or switches on the drives. The system board suppor ts Enhanced IDE or ATA-2, ATA/33, ATA/66 or ATA/100 hard drives.

  • Page 49: Irda Connector

    Hardware Installation IrDA Connector N. C. IRRX Ground IRTX Connect the cable connector from your IR module to the IR connector (J13). Note: The sequence of the pin functions on some IR cable may be reversed from the pin function defined on the system board. Make sure to connect the cable connector to the IR connector according to their pin functions.

  • Page 50: Cooling Fan Connectors

    Hardware Installation Cooling Fan Connectors Speed Ground Control Power Sense CPU fan Sense Power Ground Chassis fan Connect the CPU fan’s cable connector to the CPU fan connector (J8) on the system board. The chassis fan connector (J10) is used to connect an additional cooling fan.

  • Page 51: Power Connectors

    Hardware Installation Power Connectors +12V +12V Ground Ground 1 2 2 4 +3.3VDC +12VDC +5VDC +12VDC +5VDC +5VDC +5VSB PWR_OK +5VDC PS_ON# +5VDC -12VDC +3.3VDC +3.3VDC +3.3VDC We recommend that you use a power supply that complies with the ATX12V Power Supply Design Guide Version 1.1. An ATX12V power supply has a standard 24-pin ATX main power connector and a 4-pin +12V power connector that must be inserted onto CN8 and CN9 connectors respectively.

  • Page 52: Front Panel Connectors

    Hardware Installation Front Panel Connectors 2 01 9 SPEAKER RESET ATX-SW HD-LED PWR-LED HD-LED: Primary/Secondary IDE LED This LED will light when the hard drive is being accessed. RESET: Reset Switch This switch allows you to reboot without having to power off the system thus prolonging the life of the power supply or system.
  • Page 53 Hardware Installation PWR-LED: Power/Standby LED When the system’s power is on, this LED will light. When the system is in the S1 (POS - Power On Suspend) or S3 (STR - Suspend To RAM) state, it will blink every second. Note: If a system did not boot-up and the Power/Standby LED did not light after it was powered-on, it may indicate that the CPU...
  • Page 54 Hardware Installation PCI Express x16 and x1 Slots PCI Express x16 PCI Express x1 The system board is equipped with one PCI Express x16 and one PCI Express x1 slots. PCI Express x16 Install PCI Express x16 graphics card, that comply to the PCI Express specifications, into the PCI Express x16 slot.

  • Page 55: Chapter 3 - Bios Setup

    BIOS Setup Chapter 3 - BIOS Setup Award BIOS Setup Utility The Basic Input/Output System (BIOS) is a program that takes care of the basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features found in this system board.

  • Page 56: Bios Setup

    BIOS Setup Standard CMOS Features Use the arrow keys to highlight “Standard CMOS Features” and press <Enter>. A screen similar to the one below will appear. The settings on the screen are for reference only. Your version may not be identical to this one. Date The date format is <day>, <month>, <date>, <year>.
  • Page 57 BIOS Setup IDE Channel 0 Master/Slave and IDE Channel 1 Master/Slave Move the cursor to the “IDE Channel 0 Master”, “IDE Channel 0 Slave”, “IDE Channel 1 Master” or “IDE Channel 1 Slave” field, then press <Enter>. The settings on the screen are for reference only. Your version may not be identical to this one.
  • Page 58 BIOS Setup Access Mode For hard drives larger than 528MB, you would typically select the LBA type. Certain operating systems require that you select CHS or Large. Please check your operating system’s manual or Help desk on which one to select. Capacity Displays the approximate capacity of the disk drive.
  • Page 59 BIOS Setup Video This field selects the type of video adapter used for the primary system monitor. Although secondary monitors are supported, you do not have to select the type. The default setting is EGA/VGA. EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SVGA and PGA monitor adapters.
  • Page 60 BIOS Setup Extended Memory Displays the amount of extended memory detected during boot-up. Total Memory Displays the total memory available in the system.

  • Page 61: Advanced Bios Features

    BIOS Setup Advanced BIOS Features The Advanced BIOS Features allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. The screen above list all the fields available in the Advanced BIOS Features submenu, for ease of reference in this manual.
  • Page 62 BIOS Setup CPU Feature Move the cursor to this field and press <Enter>. The following screen will appear. The settings on the screen are for reference only. Your version may not be identical to this one. Delay Prior To Thermal This field is used to select the time that would force the CPU to a 50% duty cycle when it exceeds its maximum operating temperature therefore protecting the CPU and the system board from...
  • Page 63 BIOS Setup Limit CPUID MaxVal The CPUID instruction of some newer CPUs will return a value greater than 3. The default is Disabled because this problem does not exist in the Windows series operating systems. If you are using an operating system other than Windows, this problem may occur. To avoid this problem, enable this field to limit the return value to 3 or lesser than 3.
  • Page 64 BIOS Setup Virus Warning This field protects the boot sector and partition table of your hard disk drive. When this field is enabled, the Award BIOS will monitor the boot sector and partition table of the hard disk drive. If an attempt is made to write to the boot sector or partition table of the hard disk drive, the BIOS will halt the system and an error message will appear.
  • Page 65 BIOS Setup First Boot Device, Second Boot Device, Third Boot Device and Boot Other Device Select the drive to boot first, second and third in the “First Boot Device” “Second Boot Device” and “Third Boot Device” fields respectively. The BIOS will boot the operating system according to the sequence of the drive selected.
  • Page 66 BIOS Setup Typematic Rate Setting Disabled Continually holding down a key on your keyboard will cause the BIOS to report that the key is down. Enabled The BIOS will not only report that the key is down, but will first wait for a moment, and, if the key is still down, it will begin to report that the key has been depressed repeatedly.
  • Page 67 BIOS Setup MPS Version Control for OS This field is used to select the MPS version that the system board is using. OS Select for DRAM > 64MB This field allows you to access the memory that is over 64MB in OS/2.

  • Page 68: Advanced Chipset Features

    BIOS Setup Advanced Chipset Features The settings on the screen are for reference only. Your version may not be identical to this one. This section gives you functions to configure the system based on the specific features of the chipset. The chipset manages bus speeds and access to system memory resources.
  • Page 69 BIOS Setup Manual If you want better performance for your system other than the one “by SPD”, select “Manual” then select the best option in the “CAS Latency Time” to “System Memory Frequency” fields. CAS Latency Time This field is used to select the latency between the DRAM read command and the time that the data was received.
  • Page 70 BIOS Setup Memory Hole At 15M-16M In order to improve system performance, certain space in memory can be reserved for ISA cards. This memory must be mapped into the memory space below 16MB. When enabled, the CPU assumes the 15- 16MB memory range is allocated to the hidden ISA address range instead of the actual system DRAM.

  • Page 71: Integrated Peripherals

    BIOS Setup Integrated Peripherals The settings on the screen are for reference only. Your version may not be identical to this one. OnChip IDE Device Move the cursor to this field and press <Enter>. The following screen will appear. The settings on the screen are for reference only. Your version may not be identical to this one.
  • Page 72 BIOS Setup IDE HDD Block Mode Enabled The IDE HDD uses the block mode. The system BIOS will check the hard disk drive for the maxi- mum block size the system can transfer. The block size will depend on the type of hard disk drive. Disabled The IDE HDD uses the standard mode.
  • Page 73 BIOS Setup On-Chip Serial ATA Setting On-Chip Serial ATA Disabled Disables the onboard SATA. Auto The system will detect the existing SATA and IDE drives then automatically set them to the available master/slave mode. Combined Mode This option allows you to use both IDE and SATA drives;...
  • Page 74 BIOS Setup SATA Port If the “PATA IDE Mode” field is set to Primary, this field will show “P1, P3 is Secondary”; meaning SATA 2 and SATA 4 are Secondary. If the “PATA IDE Mode” field is set to Secondary, this field will show “P0, P2 is Primary”;...
  • Page 75 BIOS Setup USB Keyboard Support By default, this field is Disabled. However, if you are using a USB keyboard under DOS, make sure to enable this function. USB Mouse Support This field is used to enable or disable the USB mouse. AC97 Audio Auto Select this option when using the onboard audio...

  • Page 76: Kbc Input Clock

    BIOS Setup Super IO Device Move the cursor to this field and press <Enter>. The following screen will appear. Phoenix - AwardBIOS CMOS Setup Utility Super IO Device KBC Input Clock 8 MHz Item Help Power On Function BUTTON ONLY Menu Level Enter x KB Power On Password...
  • Page 77 BIOS Setup Mouse Click When this option is selected, click the mouse button to power-on the system. Any Key Press any key to power-on the system. Keyboard 98 When this option is selected, press the “wake up” ® key of the Windows 98 compatible keyboard to power-on the system.
  • Page 78 BIOS Setup UART2 Mode Select This field is used to select the type of IrDA standard supported by your IrDA device. For better transmission of data, your IrDA peripheral device must be within a 30 angle and within a distance of 1 meter.

  • Page 79: Power Management Setup

    BIOS Setup Power Management Setup The Power Management Setup allows you to configure your system to most effectively save energy. The screen above list all the fields available in the Power Management Setup submenu, for ease of reference in this manual.
  • Page 80 BIOS Setup Run VGABIOS if S3 Resume When this field is set to Auto, the system will initialize the VGA BIOS when it wakes up from the S3 state. This can be configured only if the “ACPI Suspend Type” field is set to “S3(STR)”. Power Management This field allows you to select the type (or degree) of power saving by changing the length of idle time that elapses before the Suspend...
  • Page 81 BIOS Setup Suspend Mode This is selectable only when the Power Management field is set to User Define. When the system enters the Suspend mode according to the power saving time selected, the CPU and onboard peripherals will be shut off. HDD Power Down This is selectable only when the Power Management field is set to User Define.
  • Page 82 BIOS Setup PWR Lost Resume State Keep Off When power returns after an AC power failure, the system’s power is off. You must press the Power button to power-on the system. Turn On When power returns after an AC power failure, the system will automatically power-on.
  • Page 83 BIOS Setup Resume By Alarm Enabled When Enabled, you can set the date and time you would like the Soft Power Down (Soft-Off) PC to power-on in the “Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm” fields. However, if the system is being accessed by incoming calls or the network (Resume On Ring/LAN) prior to the date and time set in these fields, the system will give priority to the incoming calls...
  • Page 84 BIOS Setup PnP/PCI Configurations This section describes configuring the PCI bus system. It covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. The settings on the screen are for reference only. Your version may not be identical to this one.
  • Page 85 BIOS Setup Resources Controlled By The Award Plug and Play BIOS has the capability to automatically configure all of the boot and Plug and Play compatible devices. Auto The system will automatically detect the settings for you. Manual Choose the specific IRQ in the “IRQ Resources” field respectively.

  • Page 86: Pc Health Status

    BIOS Setup PC Health Status The settings on the screen are for reference only. Your version may not be identical to this one. Shutdown Temperature You can prevent the system from overheating by selecting a tem- perature in this field. If the system detected that its temperature exceeded the one set in this field, it will automatically shutdown.
  • Page 87 BIOS Setup Frequency/Voltage Control The settings on the screen are for reference only. Your version may not be identical to this one. Auto Detect PCI Clk When enabled, the system will automatically send clock signals to existing PCI devices. Spread Spectrum Leave this field in its default setting.
  • Page 88 BIOS Setup Load Fail-Safe Defaults The “Load Fail-Safe Defaults” option loads the troubleshooting default values permanently stored in the ROM chips. These settings are not optimal and turn off all high performance features. You should use these values only if you have hardware problems. Highlight this option in the main menu and press <Enter>.

  • Page 89: Load Optimized Defaults

    BIOS Setup Load Optimized Defaults The “Load Optimized Defaults” option loads optimized settings from the BIOS ROM. Use the default values as standard values for your system. Highlight this option in the main menu and press <Enter>. Type <Y> and press <Enter> to load the Setup default values.

  • Page 90: Set Supervisor Password

    BIOS Setup Set Supervisor Password If you want to protect your system and setup from unauthorized entry, set a supervisor’s password with the “System” option selected in the Advanced BIOS Features. If you want to protect access to setup only, but not your system, set a supervisor’s password with the “Setup”...

  • Page 91: Set User Password

    BIOS Setup Set User Password If you want another user to have access only to your system but not to setup, set a user’s password with the “System” option se- lected in the Advanced BIOS Features. If you want a user to enter a password when trying to access setup, set a user’s password with the “Setup”...
  • Page 92 BIOS Setup Save & Exit Setup When all the changes have been made, highlight “Save & Exit Setup” and press <Enter>. Type “Y” and press <Enter>. The modifications you have made will be written into the CMOS memory, and the system will reboot. You will once again see the initial diagnostics on the screen.

  • Page 93: Exit Without Saving

    BIOS Setup Exit Without Saving When you do not want to save the changes you have made, highlight “Exit Without Saving” and press <Enter>. Type “Y” and press <Enter>. The system will reboot and you will once again see the initial diagnostics on the screen. If you wish to make any changes to the setup, press <Ctrl>...

  • Page 94: Updating The Bios

    BIOS Setup Updating the BIOS To update the BIOS, you will need the new BIOS file and a flash utility, AWDFLASH.EXE. Please contact technical support or your sales representative for the files. 1. Save the new BIOS file along with the flash utility AWDFLASH.EXE to a floppy disk.
  • Page 95 BIOS Setup 6. The following will appear. Do You Want to Save BIOS (Y/N) This question refers to the current existing BIOS in your system. We recommend that you save the current BIOS and its flash utility; just in case you need to reinstall the BIOS. To save the current BIOS, press <Y>...

  • Page 96: Chapter 4 - Supported Softwares

    Supported Software Chapter 4 - Supported Software Drivers, Utilities and Software Applications The CD that came with the system board contains drivers, utilities and software applications required to enhance the performance of the system board. Inser t the CD into a CD-ROM drive. The autorun screen (Mainboard Utility CD) will appear.

  • Page 97: Intel Chipset Software Installation Utility

    Supported Software Intel Chipset Software Installation Utility The Intel Chipset Software Installation Utility is used for updating ® Windows INF files so that the Intel chipset can be recognized and configured properly in the system. To install the utility, click “Intel Chipset Software Installation Utility” on the main menu.

  • Page 98: Intel Graphics Drivers

    Supported Software Intel Graphics Drivers To install the driver, click “Intel Graphics Drivers” on the main menu. 1. Go through the readme document for more installation tips then click Next. 2. You are now ready to install the driver. Click Next.

  • Page 99: Supported Software

    Supported Software Realtek Audio Drivers To install the driver, click “Realtek Audio Drivers” on the main menu. 1. The installation wizard will extract the files needed to install AC97 audio. After all files have been extracted, click Next. 2. AC97 audio is intalling and configuring the new software installation.

  • Page 100: Realtek Lan Drivers

    Supported Software Realtek LAN Drivers To install the driver, click “Realtek LAN Drivers” on the main menu. 1. LanSetup preparing the installation wizard. 2. You are now ready to install the driver. Click Next. 3. LanSetup is installing the new driver.
  • Page 101 Supported Software 4. Click Finish. Reboot the system for the driver to take effect.
  • Page 102 Supported Software ITE Hardware Monitor The system board comes with the ITE Hardware Monitor utility. This utility is capable of monitoring the system’s temperature, fan speed, voltage, etc. and allows you to manually set a range (Highest and Lowest Limit) to the items being monitored.
  • Page 103 Supported Software 2. Click Next to add the program icon to the Program Folder. 4. Click Finish. Reboot the system for the driver to take effect.
  • Page 104 Supported Software Microsoft DirectX 9.0 To install, click “Microsoft DirectX 9.0” on the main menu. 1. Click “I accept the agreement” then click Next. 2. You are now ready to install DirectX. Click Next.
  • Page 105 Supported Software 3. Click Finish. Reboot the system for DirectX to take effect.

  • Page 106: Installation Notes

    Supported Software Intel USB 2.0 Drivers ® The Intel chipset does not support USB 2.0 drivers for Windows ® 98 SE and Windows ® Windows ® If your Windows XP CD already includes Service Pack 1, the USB 2.0 driver will automatically install when you install the operating system.

  • Page 107: Appendix A - Enabling Hyper-Threading Technology

    Enabling Hyper-Threading Technology Appendix A - Enabling Hyper-Threading Technology Enabling Hyper-Threading Technology To enable the functionality of the Hyper-Threading Technology, please follow the requirements and steps below. Basically, the following ® ® presumes that you have already installed an Intel Pentium Processor with Hyper-Threading Technology.
  • Page 108 Enabling Hyper-Threading Technology Click the General tab. The processor shown under Computer should resemble the one shown below. Now click the Hardware tab then click Device Manager. The items shown under Computer and Processors should resemble the ones shown below.
  • Page 109 Enabling Hyper-Threading Technology Lastly, press the <Ctr l> <Alt> and <Del> keys simultaneously. The Windows Task Manager dialog box will appear. Click the Performance tab. The diagram under CPU Usage History should resemble the one shown below.

  • Page 110: Appendix B - System Error Messages

    System Error Message Appendix B - System Error Message When the BIOS encounters an error that requires the user to cor- rect something, either a beep code will sound or a message will be displayed in a box in the middle of the screen and the message, PRESS F1 TO CONTINUE, CTRL-ALT-ESC or DEL TO ENTER SETUP, will be shown in the information box at the bottom.
  • Page 111 System Error Message Hard Disk(s) fail (80) HDD reset failed. Hard Disk(s) fail (40) HDD controller diagnostics failed. Hard Disk(s) fail (20) HDD initialization error. Hard Disk(s) fail (10) Unable to recalibrate fixed disk. Hard Disk(s) fail (08) Sector Verify failed. Keyboard is locked out - Unlock the key The BIOS detects that the keyboard is locked.

  • Page 112: Appendix C - Troubleshooting

    Troubleshooting Appendix C - Troubleshooting Troubleshooting Checklist This chapter of the manual is designed to help you with problems that you may encounter with your personal computer. To efficiently troubleshoot your system, treat each problem individually. This is to ensure an accurate diagnosis of the problem in case a problem has multiple causes.

  • Page 113: Power Supply

    Troubleshooting The picture seems to be constantly moving. 1. The monitor has lost its vertical sync. Adjust the monitor’s vertical sync. 2. Move away any objects, such as another monitor or fan, that may be creating a magnetic field around the display. 3.

  • Page 114: Hard Drive

    Troubleshooting Hard Drive Hard disk failure. 1. Make sure the correct drive type for the hard disk drive has been entered in the BIOS. 2. If the system is configured with two hard drives, make sure the bootable (first) hard drive is configured as Master and the sec- ond hard drive is configured as Slave.

  • Page 115: Troubleshooting

    Troubleshooting 3. Verify that the attached serial device works by attaching it to a serial port that is working and configured correctly. If the serial device does not work, either the cable or the serial device has a problem. If the serial device works, the problem may be due to the onboard I/O or the address setting.

  • Page 116: Appendix D - Watchdog Sample Code

    Watchdog Sample Code Appendix D - Watchdog Sample Code ;Software programming example: ;---------------------------------------------------------------- ;(1)Enter Superio Configuration mode ;---------------------------------------------------------------- DX,2Eh AL,87h DX,AL AL,01h DX,AL AL,55h DX,AL AL,55h DX,AL ;-------------------------------------------------------------------------- ;(2) Configuration Logical Device 7,register CR72 & CR73 (Watch Dog Timer enable & Time-Out Value Register) ;-------------------------------------------------------------------------- DX,2Eh AL,07h...
  • Page 117 Watchdog Sample Code DX,2Eh AL,73h ;Select CR73 (Watch Dog Timer Time-Out Value Register) DX,AL DX,2Fh AL,02h ;Set CR73 value = 02h => Watch Dog Time = 2 (unit:Min) DX,AL ;------------------------------------------- ;(3) Exit extended function mode ;------------------------------------------- DX,2Eh AL,02h DX,AL DX,2Fh AL,02h DX,AL...

Table of Contents