Irq Resources - DFI LANParty UT ICFX3200-T2R/G User Manual

IRQ Resources

Move the cursor to this field and press <Enter>. This field is used to
set each system interrupt to either Reserved or PCI Device.
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards can
work with PCI/VGA or not.
Enabled
Disabled
Assign IRQ For VGA
When Enabled, the system automatically assigns an IRQ for the VGA
card installed. Your VGA card will need an IRQ only when using the
video capture function of the card. If you are not using this function
and a new device requires an IRQ, you can set this field to Disabled.
The IRQ (previously occupied by the VGA card) will be available for
your new device.
Phoenix - AwardBIOS CMOS Setup Utility
IRQ Resources
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
MPEG ISA/VESA VGA cards work with PCI/VGA.
MPEG ISA/VESA VGA cards does not work with
PCI/VGA.
BIOS Setup
Item Help
Menu Level
Legacy ISA for devices
compliant with the
original PC AT bus
specification. PCI/ISA
PnP for devices
compliant with the Plug
and Play standard
whether designed for
PCI or ISA bus
architecture.
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
109