DFI LANParty UT ICFX3200-T2R/G User Manual page 82

3
BIOS Setup
Drive A and Drive B
These fields identify the types of floppy disk drives installed.
None
360K, 5.25 in. 5-1/4 in. standard drive; 360KB capacity
1.2M, 5.25 in.
720K, 3.5 in.
1.44M, 3.5 in. 3-1/2 in. double-sided drive; 1.44MB capacity
2.88M, 3.5 in. 3-1/2 in. double-sided drive; 2.88MB capacity
Video
This field selects the type of video adapter used for the primary
system monitor. Although secondary monitors are supported, you do
not have to select the type. The default setting is EGA/VGA.
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For
CGA 40
CGA 80
Mono
Halt On
This field determines whether the system will stop if an error is
detected during power up. The default setting is All Errors.
No Errors
All Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
8 2
No floppy drive is installed
5-1/4 in. AT-type high-density drive; 1.2MB capacity
3-1/2 in. double-sided drive; 720KB capacity
EGA, VGA, SVGA and PGA monitor adapters.
Color Graphics Adapter. Power up in 40-column
mode.
Color Graphics Adapter. Power up in 80-column
mode.
Monochrome adapter.
The system boot will not stop for any errors
detected.
The system boot will stop whenever the
BIOS detects a non-fatal error.
The system boot will not stop for a key-
board error; it will stop for all other errors.
The system boot will not stop for a disk er-
ror; it will stop for all other errors.
The system boot will not stop for a disk or
keyboard error; it will stop for all other er-
rors.