DFI LANParty UT ICFX3200-T2R/G User Manual page 86

3
BIOS Setup
Security Option
This field determines when the system will prompt for the password-
everytime the system boots or only when you enter the BIOS setup.
Set the password in the Set Supervisor/User Password submenu.
System
Setup
MPS Version Control for OS
This field is used to select the MPS version that the system board is
using.
OS Select for DRAM > 64MB
This field allows you to access the memory that is over 64MB in
OS/2.
HDD S.M.A.R.T. Capability
The system board supports SMART (Self-Monitoring, Analysis and
Reporting Technology) hard drives. SMART is a reliability prediction
technology for ATA/IDE and SCSI drives. The drive will provide suffi-
cient notice to the system or user to backup data prior to the
drive's failure. The default is Disabled. If you are using hard drives
that support S.M.A.R.T., set this field to Enabled. SMART is sup-
ported in ATA/33 or later hard drives.
Delay For HDD (Secs)
This field is used to select the time that would delay the HDD controller's
initial time. This is specially useful for some HDDs which will not be ready
at first boot when you power-on the system.
8 6
The system will not boot and access to Setup will be
denied unless the correct password is entered at the
prompt.
The system will boot, but access to Setup will be denied
unless the correct password is entered at the prompt.