DFI LANParty UT ICFX3200-T2R/G User Manual page 80

3
BIOS Setup
To configure Serial ATA drives, move the cursor to a field then press
<Enter>. The following screen will appear.
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
IDE Auto-Detection
Detects the parameters of the drive. The parameters will automati-
cally be shown on the screen.
Extended IDE Drive
The default is Auto. The BIOS will automatically detect the Serial ATA
drives.
Access Mode
For hard drives larger than 528MB, you would typically select the
LBA type. Certain operating systems require that you select CHS or
Large. Please check your operating system's manual or Help desk on
which one to select.
Capacity
Displays the approximate capacity of the disk drive. Usually the size
is slightly greater than the size of a formatted disk given by a disk
checking program.
8 0
Phoenix - AwardBIOS CMOS Setup Utility
IDE Auto-Detection
Extended IDE Drive
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
: Move Enter: Select
Internal Phy SATA 1
Press Enter
Auto
Auto
0 MB
0
0
0
0
0
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
To auto-detect the
HDD's size, head... on
this channel
ESC: Exit F1: General Help
F7: Optimized Defaults