Installing The Dim Module - DFI LANParty UT ICFX3200-T2R/G User Manual

Installing the DIM Module

1. Make sure the PC and all other peripheral devices connected to
it has been powered down.
2. Disconnect all power cords and cables.
3. Locate the DDR2 socket on the system board.
4. Push the "ejector tabs" which are at the ends of the socket to
the side.
Ejector
tab
5. Note how the module is keyed to the socket.
Hardware Installation
DDR2 sockets
Notch
Key
2
Ejector
tab
31