Bios Setup - DFI LANParty UT ICFX3200-T2R/G User Manual

3

BIOS Setup

Primary IDE Master/Slave and Internal Phy SATA 1/2/3/4
Primary IDE Master
Primary IDE Slave
Internal Phy SATA 1
Internal Phy SATA 2
Internal Phy SATA 3
Internal Phy SATA 4
To configure IDE drives, move the cursor to a field then press
<Enter>. The following screen will appear.
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
IDE HDD Auto-Detection
Detects the parameters of the drive. The parameters will automati-
cally be shown on the screen.
7 8
Note:
The fields for configuring Serial ATA drives will appear only if the
"ATI SATA Controller" field is set to Enabled. This field is in the
Integrated Peripherals submenu, South OnChip PCI Device sec-
tion of the BIOS.
Phoenix - AwardBIOS CMOS Setup Utility
IDE HDD Auto-Detection
Primary IDE Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
: Move Enter: Select
Used to configure Parallel ATA drives
Used to configure Serial ATA drives
Primary IDE Master
Press Enter
Auto
Auto
0 MB
0
0
0
0
0
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
To auto-detect the
HDD's size, head... on
this channel
ESC: Exit F1: General Help
F7: Optimized Defaults