DFI LANParty UT ICFX3200-T2R/G User Manual page 105

Power Management Option
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the "HDD
Power Down" field is activated.
Min Saving
Max Saving
User Define
HDD Power Down
This is selectable only when the Power Management field is set to
User Define. When the system enters the HDD Power Down mode
according to the power saving time selected, the hard disk drive will
be powered down while all other devices remain active.
Video Off Option
Always On
Suspend -> Off
All Modes -> Off
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank
Blank Screen
DPMS Support
Minimum power saving time for the "HDD Power
Down" = 15 min.
Maximum power saving time for the "HDD Power
Down" = 1 min.
Allows you to set the power saving time in the
"HDD Power Down" field.
The system BIOS will never turn off the
screen.
The screen is off when the system is in the
Suspend mode.
The screen is off when the system is in the
Doze, Standby or Suspend mode.
This selection will cause the system to turn
off the vertical and horizontal synchroniza-
tion ports and write blanks to the video
buffer.
This option only writes blanks to the video
buffer.
Initializes display power management
signaling. Use this option if your video
board supports it.
3
BIOS Setup
105