Resources Controlled By; Reset Configuration Data - DFI G586IPV User Manual

Resources Control By

Reset Configuration Data

Resources Controlled By

The BIOS has the capacity to automatically configure all of the boot and
compatible devices. However, this capability means absolutely nothing unless
you are using an operating system such as Windows 95. The default value is
Auto.
Auto The BIOS will control the locations of the resources.
Manual You can set the locations of the resources. The screen will
appear the information of the IRQ and DMA.
Reset Configuration Data
This item allows you to determine whwther to reset the configuration data or
not.
Enabled The BIOS will reset the configuration data automatically.
Disabled The BIOS will not reset the configuration data.
PCI IRQ Activated By
This sets the method by which the PCI bus recognizes that an IRQ service is
being requested by a device. Under all circumstances, you should retain the
default configuration unless advised otherwise by your system's manufacturer.
The default value is Level.
46
ROM PCI/ISA BIOS (2A59GD49)
PNP/PCI CONFIGURATION SETUP
AWARD SOFTWARE, INC.
:Auto PCI IRQ Active By
PCI IDE IRQ Map To
:Disabled
Primary IDE INT#
Secondary IDE INT#
ESC :Quit
F1 :Help
F5 :Old Values
F6 :Load BIOS Defaults
F7 :Load Setup Defaults
: Level
: PCI-AUTO
: A
: B
↑ ↓ → ←
:Select Item
PU/PD/+/- :Modify
(Shift) F2
:Color