Integrated Peripherals; Init Display First - DFI LANParty UT ICFX3200-T2R/G User Manual

3
BIOS Setup

Integrated Peripherals

x Power On By Button
x KB Power On Password
x Hot Key Power On
x CIR Port IRQ
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
South OnChip IDE Device
South OnChip PCI Device

Init Display First

This field is used to select whether to initialize the PCI Express or
PCI first when the system boots.
PCIEx
PCI Slot
USB EHCI Controller
This field is used to enable or disable USB 2.0.
OnChip USB Controller
This field is used to enable or disable the onboard USB.
9 6
Phoenix - AwardBIOS CMOS Setup Utility
South OnChip IDE Device
South OnChip PCI Device
Init Display First
USB EHCI Controller
OnChip USB Controller
USB Keyboard Support
USB Mouse Support
IDE HDD Block Mode
Power On By Mouse
Power On By Keyboard
Onboard FDC Controller
Onboard Serial Port
PWRON After PWR-Fail
CIR Port Address
: Move Enter: Select
When the system boots, it will first initialize the PCI
Express graphics card.
When the system boots, it will first initialize PCI.
Integrated Peripherals
Press Enter
Press Enter
PCIEx
Enabled
Enabled
Disabled
Disabled
Enabled
Disabled
Button Only
Enabled
Enter
Ctrl-F1
Enabled
3F8/IRQ4
Off
Disabled
11
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Refer to the following pages for more
information on these submenus
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults