DFI LANParty UT ICFX3200-T2R/G User Manual page 98

3
BIOS Setup
Power On By Keyboard
This field allows you to use the keyboard to power-on the system.
Button only
Password
Hot Key
Any Key
Keyboard 98 When this option is selected, press the "wake up"
Power On By Button
To use the power button to power on the system, set this field to
Enabled.
KB Power On Password
Move the cursor to this field and press <Enter>. Enter your password.
You can enter up to 5 characters. Type in exactly the same password to
confirm, then press <Enter>.
The power button will not function once a keyboard password has
been set in this field. You must type the correct password to power-on
the system. If you forgot the password, power-off the system and remove
the battery. Wait for a few seconds and install it back before powering-
on the system.
Hot Key Power On
This field is used to select a function key that you would like to use to
power-on the system.
9 8
Default setting. Uses the power button to power
on the system.
When this option is selected, set the password you
would like to use to power-on the system in the
"KB Power On Password" field.
When this option is selected, select the function key
you would like to use to power-on the system in
the "Hot Key Power On" field.
Press any key to power-on the system.
key of the Windows
power-on the system.
®
98 compatible keyboard to