DFI LANParty UT ICFX3200-T2R/G User Manual page 119

3
BIOS Setup
Memory Channels
This field is used to select the memory channel.
Memory Power Management
The options are Disabled, Dynamic CKE, Dynamic Command and
Dynamic Clock.
IGD Clock Gate
The options are Enabled and Disabled.
NB Channel Mapping
The options are Auto and Manual.
Simple Addr Translation
The options are Enabled and Disabled.
Chip-Select Swap
The options are Enabled and Disabled.
Burst Length
This field is used to select the DRAM's burst length. The DRAM will
predict the address of the next memory location to be accessed
after the first address is accessed. To use the burst feature, select the
burst length which is the actual length of burst plus the starting
address and allows internal address counter to properly generate
the next memory location. The larger the size, the faster the DRAM
performance.
Bank0 Map GFX, Bank1 Map GFX and Bank2 Map GFX
The options are Off and 1 to 15.
Channel Mapping NB
The options are Off and 1 to 15.
Channel Mapping GFX
The options are Off and 1 to 15.
119