Chapter 1 - Introduction; Specifications - DFI LANParty UT ICFX3200-T2R/G User Manual

1
Introduction

Chapter 1 - Introduction

Specifications

Processor
Chipset
System Memory
Expansion Slots
ATI CrossFire and
ATI Physics
BIOS
Power Management
Hardware Monitor
LAN
10
• LGA 775 socket for:
- Intel ® Core TM 2 Quad, Intel
®
Duo, Intel Pentium
• Supports Intel Enhanced Memory 64 Technology (EMT64T)
• Supports Enhanced Intel SpeedStep Technology (EIST)
• Supports Intel Hyper-Threading Technology
• Supports 1066/800MHz FSB
• ATI chipset
- Northbridge: ATI RD600
- Southbridge: ATI SB600
• Four 240-pin DDR2 DIMM sockets
• Supports DDR2 667 and DDR2 800 DIMMs
• Supports dual channel (128-bit wide) memory interface
• Supports up to 8GB system memory
• Supports unbuffered non-ECC x8 and x16 DIMMs
• 3 PCI Express x16 slots for ATI CrossFire and ATI Physics
• 3 PCI slots
• 2+1 Configuration (2 Graphics + 1 Physics)
- 2 ATI CrossFire graphics cards (each operates at x8 band-
width).
- 1 ATI Physics graphics card operates at x2 bandwidth.
• Award BIOS
• CMOS Reloaded
• CPU/DRAM overclocking
• CPU/DRAM/Chipset overvoltage
• 8Mbit flash memory
• ACPI and OS Directed Power Management
• ACPI STR (Suspend to RAM) function
• Wake-On-PS/2 Keyboard/Mouse
• Wake-On-USB Keyboard/Mouse
• Wake-On-Ring
• Wake-On-LAN
• RTC timer to power-on the system
• AC power failure recovery
• Monitors CPU/system/chipset temperature
• Monitors 12V/5V/3.3V/Vcore/Vbat/5Vsb/Vdimm/Vchip voltages
• Monitors the speed of the cooling fans
• CPU Overheat Protection function monitors CPU temperature
during system boot-up
• Marvell 88E8052 and Marvell 88E8053 Gigabit PCIE LAN
• Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-
TX) and 802.3ab (1000BASE-T) standards
® Core TM 2 Extreme, Intel
® ® ®
D or Intel Pentium
® Core TM 2
4