Table of Contents
Advertisement
Mode Select Menu
Ready
PAR
600 A4 001
Interface
Parallel
Serial
Option1
Option2
Number of copies
001
Continued on next page
>
>Parallel I/F
Nibble (high)
Auto
High Speed
Normal
>Baud rate
9600
>Data bits
8
>Stop bits
1
>Parity
None
>Protocol
DTR (pos.)&XON
>Barcode mode
Off
>NetWare
Off
On
>TCP/IP
Off
On
>Ether Talk
>TCP/IP
Off
Off
>OPT. StatusPage
>TCP/IP
Off
Off
These items willl not show unless the
printer is installed with the applicable
option unit/kit.
Basic Operations During Mode Selection
This diagram gives quick reference to all
menu options and their sequence of
selection. Use this description in
combination with Chapter 2 Mode
Selection Menu.
1.
Press the MODE key to enter Mode
Selction mode.
2.
Press the + or – key repeatedly until the
message display indicates the desired
item.
3.
Press the 8 key to move to a submenu.
Press the w key to return.
4.
Press the ENTER key once the desired
menu appears. ? will flash, and the
current setting can be changed.
5.
Press the + and – key to select the
desired setting.
6.
Press the ENTER key.
If you want to re-enter a setting, press the
CANCEL key before pressing the
ENTER key.
7.
Press the EXIT key. This will enable
currently selected settings.
>>NetWare Frame
>
Auto
>>DHCP
>
OFF
>>IP Address
>>Gateway
>>Subnet Mask
Advertisement
Table of Contents
