Source Selection - Barco iCon H250 User Manual

2. Basic commands

2.10 Source selection

Description
Selects an input source.
Command
Command [0]
Data
strSource: String describing de source to be selected
strSource = C-string representing the source type (RGB, RGB (YUV), PC, YUV (RGB), DVI, Video, S-Video, HDSDI, SDI.
The source types are the names as displayed in the OSD source selection menu i.e. spaces and other char-
acters like "(" must not be omitted.
For more info about the input configurations, see the projector Owner's manual.
The acknowledge data contains also an error code and its Unicode description (this is the same error as the
one displayed on the desktop.
Some possible sources strings are :
Sources
L1 RGB
L2 RGB (YUV)
PC
DVI
Video
S-Video
Example
Selects L1 RGB (YUV).
Transmit
Start
Projector address
Command[0]
Data[0]
Data[1]
Data[2]
Data[3]
Data[4]
Data[5]
Data[6]
Data[7]
Data[8]
70
String
\x4c\x31\x20\x52\x47\x42\x00
\x4c\x32\x20\x52\x47\x42\x20\x28\x59\x55\x56\x29\x00
\x50\x43\x00
\x44\x56\x49\x00
\x4c\x31\x20\x56\x69\x64\x65\x6F\x00
\x4c\x31\x20\x53\x2D\x56\x69\x64\x65\x6F\x00
R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250/400 16/02/2007
\x38
\xfe
\x01
\x38
\x4c
\x31
\x20
\x52
\x47
\x42
\x20
\x28
\x59