Source Selection; Selecting A Source; Menu-To-Connector Comparison - Barco Cine VERSUM 60 Owner's Manual

5. SOURCE SELECTION

Overview
•

Selecting a source

•

Menu-to-connector comparison

5.1 Selecting a Source
More than one input device can be connected to the projector at the same time. The source selection menu allows you to select the in-
put source.
How to select a source
1 Press ADJ to open the main menu.
2 Press ↑ or ↓ (up/down buttons on the remote control) to scroll through the menu and select a source (image 5-1). (Or press the
equivalent number on the remote control.)
3 Press ENTER to confirm your choice.
Image 5-1
Main menu
5.2 Menu-to-connector comparison
The input source that you select from the main menu corresponds directly to one of the connectors on the projector, and to the input
device connected to that connector (image 5-2).
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
R5976691 CINE VERSUM 70/60 24112003
SOURCE SELECTION
15