6. GUI – SOURCE
About the Source menu
This menu is used to select, review and configure sources into the projector.
Overview of features
•
Source Selection
•
Connector Settings
6.1
Source Selection
How to select?
1. Press Menu to activate the menus and select Source.
Image 6-1
Select Source
2. Press OK.
The Select Source menu is displayed with the actual available sources filled out.
3. Select the desired input.
6.2
Connector Settings
How to configure the connector
1. Press Menu to activate the menus and select Source.
Image 6-2
Select Source
2. Press OK.
The Select Source menu is displayed with the actual available sources filled out.
3. Scroll down to the bottom of the list and select Connector Settings.
Image 6-3
The available sources are displayed.
4. Select the desired connector.
R5906852 F80 SERIES 21/09/2017
6. GUI – Source
37