Table of Contents
Advertisement
Configuring the Access Point
Configuring for Standalone Operation or for Management by FlexMaster
Step 3: Log In to the Access Point's Web Interface
1. On the administrative computer, open a Web browser window.
2. In the address or location bar, type the following address:
https://192.168.0.1
3. Press <Enter> on the keyboard to connect to the AP's Web interface. A security alert
message appears.
4. Click Yes or OK (depending on the browser) to continue. The AP's login page appears.
Figure 15.
The ZoneFlex Access Point login page
5. In User name, type super.
6. In Password, type sp-admin.
7. Click Log In. The Web interface appears, displaying the Device page.
8. Continue to
"Step 4: Configure the Wireless Settings"
below.
25
Advertisement
Table of Contents
