Accessories - Britax Safe'n'Sound Instructions For Installation & Use

Only use accessories designed and recommended by Britax Childcare Pty Ltd for this
product series number - 40/B/2013 and BS0040B-020133.
Use of aftermarket accessories, that is, accessories not provided with this child restraint
can reduce the safety of the child restraint and may cause injury or death. Always
follow the instructions covering the use of accessories in this section or the instructions
provided with accessory. If an aftermarket accessory is used that is not recommended
by Britax then ensure that the accessory is for this restraint, compliant with AS/NZS 8005
and stated as suitable for use with this child restraint.
The following instructions apply to accessories that may be supplied with this restraint
at point of purchase. If not, a variety of Safe-n-Sound accessories are available from
various retailers of Safe-n-Sound products.
PADDED INSERT - Style may vary
Some models have a separate Padded Insert
inside the Capsule for additional comfort.
CAUTION:
Shoulder straps and/or lap straps must pass
through any harness slots in the insert.
Depending on the style of insert, it may need
to be fitted by removing the shoulder straps,
refer to page 29.
Failure to do this might result in the harness
not holding the child securely.
SHOULDER PADS - Style may vary
The shoulder pads may require release by press studs. If fully fitted to the shoulder strap
then you will need to disconnect the shoulder strap as described on page 30 to 31.

ACCESSORIES

Head
Pillow
Shoulder
Pads
Padded
Insert
Instructions for Installation & Use
47