Accessories & Features - Britax safe-n-sound maxi lite Instructions For Installation & Use

ACCESSORIES & FEATURES
Use of aftermarket accessories, that is, accessories not provided with this child restraint can reduce the
safety of the child restraint and may cause injury or death. Always follow the instructions covering the use
of accessories in this section or the instructions provided with accessory. If an aftermarket accessory is
used that is not recommended by Britax Safe-n-Sound then ensure that the accessory is for this restraint
and compliant with AS/NZS 8005 and stated as suitable for use with this child restraint.
The following instructions apply to accessories that may be supplied with this restraint at point of
purchase. If not, a variety of Britax Safe-n-Sound accessories are available from various retailers of Britax
Safe-n-Sound products.
POCKET (IF FITTED)
The pocket sewn on the trim is designed for your
convenience. It can hold those necessary items
that you need at a moments notice. e.g. Bottle, face
washer, toy etc.
CAUTION: If using the pocket to store filled bottles,
please ensure contents are not contaminated due to
prolonged storage.
SHOULDER PADS (IF FITTED)
Shoulder Pads are designed to provide extra comfort
for baby or child and are easily fitted to the shoulder
harness straps by:
A. Pull apart fasteners and remove shoulder pads
from harness.
B. Re-fit shoulder pads to harness and attach
fasteners for use.
COVER (STYLE MAY VARY)
The cover has been designed to protect your child
when seated in the restraint. Care should be taken
if children either eat or drink while in the restraint as
some food or drink products may cause damage or
marking to the cover.
66
Instructions for Installation & Use - Series No. 8100/A/2013
Shoulder
Pads
Cup
Cup
holder
holder
Messy Mat™
ACCESSORIES & FEATURES
MESSY MAT™ SEAT PROTECTOR
INSTRUCTIONS (IF SUPPLIED)
Place ribbed or pocket end of the Messy Mat seat protector on
edge of car seat, smooth back toward seat join ('A') and fit in
any excess Messy Mat into the join of the car seat ('A').
CAUTION:
The pocket is only for small, light items. DO NOT overload
the pocket with heavy, bulky items as this may damage the
pocket or cause passengers to trip over them.
CUP HOLDERS (IF FITTED)
The seat has a cup holder on either side of the seat. Swing
the cup holder out from the seat to use. Ensure the cup holder
and its contents can not be crushed by the car door. Fold away
when not in use.
IMPORTANT:
Only use cup holders for holding cups, bottles and drink
cartons. Do not use for hot drinks.
Instructions for Installation & Use - Series No. 8100/A/2013
Long Messy Mat™
Ribs
Pockets
'A'
(where
fitted)
Short Messy Mat™
Ribs
Pockets
'A'
(where
fitted)
Cup Holder
67