Installation; Power; Dvi-I Connectors; Figure 2-1: 2432Tx-2 Rear View - evertz 2432TX-2 Instruction Manual

2.

INSTALLATION

The 2432TX-2 is a compact module that has two DVI-I input connector, four input BNC connector for 2
pair of analog audio (4x BNC to RCA connector supplied), four output BNC connectors and optional four
fiber optic connectors (2 per SFP) (all for connection are only needed for dual-link DVI inputs, One DB-9
serial connector for settings and one Ethernet connector for control and monitoring.
2.1.

POWER

The 2432TX-2 comes with an auto-ranging DC voltage adapter that automatically senses the input
voltage. Power need to be applied by connecting a 3-wire grounding type power supply cord to the power
entry module on the DC voltage adapter. The power cord needs to be minimum 18 AWG wire size type
SST marked VW-1, maximum 2.5m in length. The DC cable of the voltage adapter needs to be connected
to the DC power jack on the side panel. A green LED located beside the DIP switch connector will be
illuminated when power is applied to 2432TX-2.
2.2.

DVI-I CONNECTORS

DVI-I connector is for digital video inputs. Below table lists pins in the DVI-I connector. (Support DVI-D
input only)
Pin
1
2
3 Data2/4 Shield
4
5
6 DDC Clock
7 DDC Data
8 Analog VSYNC
C1 Analog RED
C4 Analog HSYNC
INSTALLATION

Figure 2-1: 2432TX-2 Rear View

Signal Pin
Data2- 9
Data2+ 10
11
Data4- 12
Data4+ 13
14
15
16
C2
C5

Table 2-1: DVI-I Input Connector

Revision 1.0
Dual Path Dual Link DVI to Serial Converter
Signal Pin
Data1- 17
Data1+ 18
Data1/3 Shield 19
Data3- 20
Data3+ 21
+5V Power 22
Ground 23
Hot Plug Detect 24
Analog GREEN C3
Ground
2432TX-2
Signal
Data0-
Data0+
Data0/5 Shield
Data5-
Data5+
Data5/Clock Shield
Clock+
Clock-
Analog BLUE
Page 3