7.
2432TX-2 CONFIGURATION USING VISTALINK
Note: Some SNMP setting on 2432TX-2 needs to be done using serial cable. Please
refer SNMP section in the manual.
7.1.
SNMP V1
Configuring VistaLINK
®
1. Obtain jar file for 2432TX-2
2. Launch VistaLINK
3. Login to VistaLINK
4. Go to Help > apply update > product > and browse to the jar file location of 2432TX-2.
5. VistaLINK
Pro will ask you to reboot, select OK.
®
6. When VistaLINK
7. Inside VistaLINK
2432TX-2
8. 2432TX-2 should appear in the hardware tab with an RX icon.
9. To access configuration settings right click on TX icon > View configuration. You will now see the
configuration pane for the 2432TX-2
VISTALINK
PRO
®
Pro:
Pro server. Wait for it to launch.
®
Pro server. Default login is administrator with no password.
®
Figure 7-1: Configuring VistaLINK
Pro Server reboots login and launch VistaLINK
®
Pro client select the tree menu bar > add/update agent > enter IP address of the
®
Dual Path Dual Link DVI to Serial Converter
®
Revision 1.0
PRO
®
PRO
Pro client.
®
2432TX-2
Page 31