Video passport
1ru multi-path video converter, frame synchronizer and decoder (91 pages)
Summary of Contents for evertz 2405EO
Page 1
Fiber Converter. All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz Microsystems.
Page 2
WARNING Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s authority to operate the equipment. Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables...
Page 3
2400 Series Fiber Converter Manual 2405EO SMPTE259M Re-Clocking Electrical to Fiber Converter REVISION HISTORY REVISION DESCRIPTION DATE Original Version Jan 02 Updated safety section and added assembly & labeling sections July 05 Revision 2.0...
Page 4
2400 Series Fiber Converter Manual 2405EO SMPTE259M Re-Clocking Electrical to Fiber Converter This page left intentionally blank Revision 2.0...
The 2405EO converter features one auto-equalized coaxial input with two reclocked serial digital outputs and one reclocked fiber output. The 2405EO has been designed to be used primarily as a reclocking SMPTE 259M or DVB-ASI distribution amplifier and converter, however SMPTE 310M (19.4 Mb/s) signals can also be reclocked.
Laser Fault Figure 1: 2405EO Block Diagram INSTALLATION The 2405EO is a compact module that has three BNC connectors and one SC/PC (shown), ST/PC or FC/PC optical connector. Figure 2: 2405EO Module SDI INPUT Input BNC connector for 10-bit serial digital video signals compatible with the SMPTE 259M, DVB-ASI or SMPTE 310M standard.
Background colour: yellow Triangular band: black Symbol: black The laser modules used in the Evertz fiber optic modules are Class I, with a maximum output power of 2mW, and wavelengths of either 1310 nm or 1470 nm to 1610 nm. 2.1.2. Assembly Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by Evertz technical personnel.
Page 10
2400 Series Fiber Converter Manual 2405EO SMPTE259M Re-Clocking Electrical to Fiber Converter Typical 2405EO Certification and Identification Label (Serial # and bar code differ from unit to unit) 2405EO-4 Revision 2.0...
5 cm to avoid fiber-bending loss that will decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic modules come with cable lockout devices, to prevent the user from damaging the fiber by installing a module into a slot in the frame that does not have a suitable I/O module.
USER CONTROLS The 2405EO is equipped with a 4 position DIP switch to allow the user to configure the module. The On position is down, or closest to the printed circuit board. Table 1 gives an overview of the DIP switch functions.
(19.4 Mb/s) signals as shown in Table 2. DIP 1 FUNCTION DESCRIPTION 259M The 2405EO will reclock SMPTE 259M (143 to 360 Mb/s), (default) SMPTE 344M (540 Mb/s) or DVB-ASI video signals.. 310M The 2405EO will reclock SMPTE 310M (19.4 Mb/s) video signals.