Overview; Figure 1-1: 2432Tx-2 Block Diagram - evertz 2432TX-2 Instruction Manual

1.

OVERVIEW

The 2432TX-2 is a versatile dual path dual-link DVI to serial digital converter. The 2432TX-2 is used as
extension of DVI over coax or fiber. The 2432TX-2 is used in combination with the 2431RX-2 dual path
dual-link DVI receiver. This self-contained unit accepts up to two simultaneous inputs (DVI, VGA or
Component), as well as 1 audio pair per video input, and transmits these inputs over coax (two cables per
input for Dual link DVI) and over fiber if SFP option install (two fibers per input for Dual link DVI). The
2432TX-2 can also be used in projects where conversion from DVI to serial digital is required. The
2431TX-2 unit is capable of scaling (best fit) input to SMPTE 259M, 292M or 424M and embeds audio.
2432TX-2 is HDCP complaint.
Features & Benefits:
•
Supports two independent DVI, VGA or component inputs
•
Provides serial digital outputs via coax as standard and via hot pluggable SFPs with the fiber optics
option installed
•
Supports SMPTE standard serial digital outputs for applications where DVI, VGA or component
video conversion to SDI is required
•
Configurable input scaling to best fit SMPTE 259M, 292M or 424M standard
•
Full 24 bits-per-pixel color resolution
•
Embedded audio (1 stereo pair per input)
•
Supports single-mode and multi-mode fiber optic cable (contact factory for multi-mode applications)
•
SNMP enabled for configuration.
•
HDCP compliant
INPUT 1
Dual Link DVI, VGA or
Component
CH1 Analog Audio input
CH2 Analog Audio input
Genlock
INPUT 2
Dual Link DVI, VGA or
Component
CH1 Analog Audio input
CH2 Analog Audio input
OVERVIEW
Dual Link DVI, VGA
or Component
A Channel
Video / Audio
Processing
Dual Link DVI, VGA
B Channel
or Component
Video / Audio
Processing

Figure 1-1: 2432TX-2 Block Diagram

Revision 1.0
Dual Path Dual Link DVI to Serial Converter
Encryption
Block
Encryption
Block
CPU
2432TX-2
1A
1B
1A
Optical SFP
2A
1B
Optical SFP
2B
2A
2B
CONTROL /
MONITORING
SERAIL
COM
Page 1