2432TX-2
Dual Path Dual Link DVI to Serial Converter
7.3.9.
Scaler Control
Figure 7-17: Scaler Control Menu
Enable: This option allows user to enable scaler. (When disable does best fit in SDI mode and pass the
input resolution if set to 3G-Glink mode).
Mode: This option allows user to set output to fill or maintain aspect ratio.
Resolution: This option allows user to pick output resolution from drop down menu.
Crop Left: This option allows user to set left starting pixel for crop.
Crop Top: This option allows user to set top starting pixel for crop.
Crop Width: This option allows user to set pixel width starting from left crop position.
Crop Height: This option allows user to set pixel height starting from top crop position.
Page 44
VISTALINK
PRO
Revision 1.0
®