evertz 2432TX-2 Instruction Manual page 51

Detect Mode: This menu allows user to set locks priority on a inputs to one of four modes.
1.
Digital only (only digital inputs are detected and transmitted)
2.
Analog only (only analog inputs are detected and transmitted)
3.
Digital Priority (Detects digital inputs first, if not detected, then will detect analog signal)
4.
Analog Priority (Detects analog signal first, if not detected, and then will detect digital
HDCP Content: This menu allows user to enable or disable HDCP content processing.

Note: When HDCP encrypted input is detected. Output 3GLINK is encrypted as well.
Color Mode: This menu allows user to select Input mode between RGB and YPbPr (RGB mode allows
DVI/VGA input and YPbPr mode allow component input).
Analog Gain Red: This option allows user to apply red color gain for analog input between 0-255 range.
Analog Gain Blue: This option allows user to apply blue color gain for analog input between 0-255 range.
Analog Gain Green: This option allows user to apply green color gain for analog input between 0-255
range.
Analog Offset Red: This option allows user to apply red color offset for analog input between 0-255
range.
Analog Offset Green: This option allows user to apply green color offset for analog input between 0-255
range.
Analog Offset Blue: This option allows user to apply blue color offset for analog input between 0-255
range.
Horizontal offset: This option allows user to apply horizontal offset to analog input between
+2047 pixels.
Vertical offset: This option allows user to apply vertical offset to analog input between -2047 to +2047
pixels.
VISTALINK PRO
®
Dual Path Dual Link DVI to Serial Converter
Revision 1.0
2432TX-2
-2047 to
Page 41