2432TX-2
Dual Path Dual Link DVI to Serial Converter
5. Add an SNMP name for the SNMP V3 role; this is just a name VLPRO uses to identify a group of
devices it is not relegated to any authentication and encryption.
6. Click the Add button to add a new device.
7. Enter IP of the unit, and select password encryption type. MD5 or SHA-1
8. Enter the username specified on the 2432TX-2 unit for authentication
9. Add the authentication password (if any) and the encryption password (if any) in the dialog box.
Click OK.
10. Navigate to user tab. Select username and click Edit.
Page 34
Figure 7-5: Add Authentication Password
Figure 7-6: Edit Username
Revision 1.0
VISTALINK
PRO
®