Table of Contents
Advertisement
TRENDnet User's Guide
Update System Firmware
Management
>
Upload Firmware
TRENDnet may periodically release firmware upgrades that might add features or fix
problems associated with your TRENDnet model and version. To find out if there is a
firmware upgrade available for your device, please check your TRENDnet model and
version using the link.
http://www.trendnet.com/downloads/
To update system firmware, do the following:
1
If a firmware upgrade is available, download the firmware to your computer.
2
Unzip the file to a folder on your computer.
3
Save the upgrade file on a flash disk.
4
Insert the flash disk into the AP.
5
Log into your access point management page (refer to
on page
10).
6
Click Management > Upload Firmware.
7
Click Browse to load the upgrade file from your computer.
8
Click Apply.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Log in to Management Page"
Configure System Log Server
Management
>
Log
To keep your system operating history, you can setup local and remote loggings.
To set up the remote loggings, do the following:
1
Log into your access point management page (refer to
on page
10).
2
Click Management > Log.
3
Check the Enable System Log checkbox.
4
Enter the log server IP address or URL.
5
Click Apply to save the settings.
To set up the local loggins, do the following:
1
Log into your access point management page (refer to
on page
10).
2
Click Management > Log.
3
Select Enable to allow local logging.
You can view the log in Status > System Log.
4
Click Apply to save the settings.
TEW-821DAP
"Log in to Management Page"
"Log in to Management Page"
47
Hide quick links:
Advertisement
Table of Contents
