7003-XXX
Fuser power cable removal
1.
Remove the LVPS/HVPS card. See
information.
Note: The cable can be reached without fully removing the card.
2.
Remove the rear cover. See
3.
Remove the exit guide assembly. See
information.
4.
Remove the two screws (B) from the lower corners of the fuser.
5.
Slide the fuser out far enough to expose and disconnect the AC cable connections.
6.
Extract the fuser power cable.
4-22
Service Manual
"LVPS/HVPS card assembly removal" on page 4-26
"Rear cover removal" on page 4-5
"Paper exit guide assembly removal" on page 4-31
for more
for more information.
for more