Number Plate Light - Malaguti Password 250 i.e. Workshop Manual

PASSWORD 250 i.e.

NUMBER PLATE LIGHT

• Number plate light (A)
12V - 5W bulb (W5W)
To check that number plate light (A) is working, set the
light switch (on the right-hand side handlebar control) to
its central position and turn the key to starting position.
REPLACING THE NUMBER PLATE LIGHT BULB
To replace the number plate light bulb:
• remove the number plate light cover (B) by undoing
screw (V);
• remove the rubber bulbholder from the plastic cover;
• replace the bulb;
• refit the bulbholder and the cover.
When performing the operations described above, take
care not to damage parts in the vicinity (transmissions,
wiring, seals, etc.).
FRAME AND RUNNING GEAR
M A I N T E N A N C E
B
V
45 11/06
A
4
A