Fan Unit - Malaguti Password 250 i.e. Workshop Manual

PASSWORD 250 i.e.

FAN UNIT

• Undo screws (V3).
NOTE For reassembly position the fan as shown in
the figure and position clamp (A) under the
screw as indicated.
RADIATOR
After having refitted the radiator and filled
the cooling system by pouring coolant into
filler point (A), bleed air from the system as
follows: loosen screw (V) and allow ALL THE
AIR to escape; now tighten screw (V).
FRAME AND RUNNING GEAR
D I S A S S E M B LY
A
83 11/06
A
V
3
V
A
5
V
3