Silencer - Malaguti Password 250 i.e. Workshop Manual

FRAME AND RUNNING GEAR
A
5

SILENCER

Before working on the silencer and the ex-
haust manifold wait until all the components
have cooled down and always wear suitable
protective gloves.
• Undo the screws (V2a) and remove the protection (G).
• Loosen the clamp screw (F).
• Undo screws (V2).
V
2
• Undo the screw (V) while holding the silencer; remove
it from the scooter.
V
NOTE To identify all components please refer to the
Spare Parts Catalogue (Table I).
D I S A S S E M B LY
25 ± 15%
25 ± 15%
V
2
98 11/06
PASSWORD 250 i.e.
V
V
2a
G
V
F
2a