Handlebar - Malaguti Password 250 i.e. Workshop Manual

FRAME AND RUNNING GEAR
A
5
HANDLEBARS
• (Remove windshield).
• (Remove upper handlebar cover).
• (Remove front/rear brake master cylinders).
• (Disconnect right and left connectors).
• Cut all cable and hose ties.
• Disconnect connectors (A).
• Disconnect cables from brake light switches (B).
• Remove throttle cables (C).
• Undo screws (V4).
• Undo screw (V1).
• Loosen nut (D) then extract the handlebars upwards
and disengage the lower handlebar cover (l) from the
handlebars.
When removing the handlebars pay attention
to the electrical connectors and all the other
parts affected by the operation.
D
D I S A S S E M B LY
50 ± 20%
B
V
4
I
114 11/06
PASSWORD 250 i.e.
A
C
D
V
1
B