Malaguti Password 250 i.e. Workshop Manual page 121

PASSWORD 250 i.e.
REMOVING THE REAR CALLIPER
• Undo screws (V2).
• Remove calliper assy. (A) complete with the brake hose.
V
2
REPLACING THE REAR CALLIPER
• Undo screw (V) and remove union (B) and relative
gaskets.
V
After having removed the calliper from its
seat, place a recipient under it to collect the
brake fluid. Dispose of used brake fluid in
compliance with statutory legislation.
REAR CALLIPER DISASSEMBLY
• Remove retaining ring (A) of brake pad pin (B).
• Remove pad pin (B).
• Remove spring (C) and the two pads (D).
NOTE Note that the minimum thickness of the pads
is 2 mm.
Spring (C) and pads (D) are marked with an
arrow to show the position of the disc with
respect to the wheel.
FRAME AND RUNNING GEAR
30 ± 20%
20 ± 10%
D I S A S S E M B LY
A
V
2
A
B
121 11/06
5
B V
D
B
A
C