Helmet Compartment - Malaguti Password 250 i.e. Workshop Manual

PASSWORD 250 i.e.

HELMET COMPARTMENT

• The helmet compartment is under the pillion seat. To
gain access to the compartment, put the scooter on its
stand and turn the ignition key counter-clockwise to
release the seat lock.
• The helmet compartment can accommodate a Jet type
helmet, positioned as shown in the figure.
Some types of helmet may not fit into the compartment.
Before choosing a helmet, make sure it fits into the
compartment.
• There is a 12V socket in the glove compartment that
can be used, for example, to recharge a mobile phone.
The socket must only be used with the engine running
and preferably with the lights off; note that using the
socket reduces battery recharging and can reduce the
battery charge level in certain circumstances.
Do not use the socket for appliances with an excessive
power draw (max. power draw: 30W).
The socket can also be used to recharge the battery by
connecting it to a battery charger for sealed batteries
when the engine is switched off.
Remember to refit the socket cap after using the socket
to prevent the ingress of foreign objects that could cause
short-circuits or other undesirable consequences.
The helmet compartment can be used to carry lightweight objects, which must be stowed in such a
way as to avoid negative effects on stability of the scooter while riding.
Do not insert items that are sensitive to high temperatures (lighters, inflammable liquids, perishable
goods, etc.).
Do not leave documents or valuables inside the helmet compartment.
FRAME AND RUNNING GEAR
GETTING TO KNOW YOUR SCOOTER
17 11/06
A
2